Mobile Video Recorder User Manual
45
Chapter 13 Local Menu Operation
Connect a display and a mouse to recorder, and you can operate the recorder locally.
Manage IP Camera
The section is only available for the recorder that supports network camera.
Before adding an IP camera, activate it by setting a password for it.
Before You Start
Connect the IP camera to IP camera interface in the recorder rear panel.
Go to Menu > Other Settings > IPC Settings.
Click Manual Management.
Select an inactivated IP camera.
Activate the selected IP camera.
Click Quick Active. The IP camera password will be set as the same with the device password.
Click Manu Active and enter the same password in New Password and Confirm.
We highly recommend you to create a strong password of your own choosing (using a minimum of
8 characters, including at least three kinds of following categories: upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
Before You Start
The IP camera is active.
Go to Menu > Other Settings > IPC Settings
Uncheck Auto Add and click Manage IP Camera.
Edit camera IP address.
1) Select an IP camera and click Edit.
2) Enter an IP address that is in the same network segment with the recorder.
Add the IP camera.
To Next Page
Loading...
Need help?
General