HIKVISION AE-MD5043 - Access Device via Web Browser

Mobile Video Recorder User Manual
3
Check the recorder status from the device list, and select the inactive recorder.
We highly recommend you to create a strong password of your own choosing (using a minimum of
8 characters, including at least three kinds of following categories: upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
Enter the same password in Password and Confirm Password.
Click Activate.
You can activate the device via a web browser.
Before You Start
Ensure your computer and the recorder are in the same network segment.
Open web browser, input the IP address of the device and then press Enter.
We highly recommend you to create a strong password of your own choosing (using a minimum of
8 characters, including at least three kinds of following categories: upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
Enter the same password in Password and Confirm.
Click OK.
Access Device via Web Browser
Get access to the recorder via web browser.
Open the web browser, enter the IP address of the recorder, and then press Enter.
Enter User Name and Password and click Login.
Install the plug-in before viewing the live video and managing the camera. Please follow the
installation prompts to install the plug-in.
What to do next
Click Logout in top right corner to log out the recorder.