Mobile Video Recorder User Manual
43
Import Configuration File
The configuration file of one device can be imported to multiple devices if they are to be configured
with the same parameters.
Only devices of the same model can share configuration file.
Go to Configuration > System > Maintenance > Upgrade & Maintenance.
Click Browse of Import Config. File and select configuration file.
Click Import and click OK in popup message box to start importing.
Configure DST Settings
Configure DST (Daylight Saving Time) settings for the system.
Go to Configuration > System > System Settings > Time Settings.
Check Enable DST.
Set Start Time and End Time for DST.
Select DST Bias.
Click Save.
Synchronize Time
Synchronize the device time when it is inconsistent with the actual time.
Go to Configuration > System > System Settings > Time Settings.
Select Time Zone according to the device location.
Select the time synchronization mode.
– If an NTP server is available, select NTP and enter NTP server information to synchronize the
device time with that of the NTP server.
– Select Manual Time Sync. and set time to customize the device time.
– Select Manual Time Sync. and check Sync. with computer time to synchronize the device time
with that of the computer.
Click Save.
Configure Menu Output
You can configure local output and resolution remotely.
To Next Page
Loading...
