Mobile Video Recorder User Manual
37
Select Alarm Output No. and enter Alarm Name.
Select Delay to set dwell time.
Alarm output will continue for the set time.
Configure arming schedule. For detailed steps, refer to Configure Arming Schedule.
Optional: Click Manual Alarm to trigger alarm manually. Click Stop Alarm to stop manual
alarm.
Optional: Click Copy to and select desired channels to o copy the above settings to other
alarm outputs.
Click Save.
Configure Exception Alarm
Configure alarms which are triggered by exceptions to take necessary actions in time.
Go to Configuration > Event > Basic Event > Exception.
Select Exception Type.
Configure linkage method. For detailed steps, refer to Configure Linkage Actions.
Click Save.
Configure Arming Schedule
Drag in time line to draw an arming period.
Adjust the set arming period.
1) Click a period and adjust its length.
2) Click a period, enter start time and end time, and click Save.
3) Click Delete All to delete all periods.
Up to 8 time periods can be set for each day and each of the time periods cannot be overlapped.
Optional: Click Copy to and select desired days to copy the above settings to other days.
Click Save.
Configure Linkage Actions
Check the linkage action(s) when events occur, and click Save.
To Next Page
Loading...
Need help?
General