Mobile Video Recorder User Manual
14
Go to Configuration > Network > Basic Settings > Port to set the following parameters.
HTTP Port
To access the recorder via web browser.
RTSP Port
To get stream.
HTTPS Port
To secure communication over a network.
Server Port
To access the recorder via client software.
If your recorder external network is a dynamic IP address, you can use the Dynamic DNS (DDNS) for
network access.
Before You Start
• Register your recorder on the DDNS server.
• Configure local network IP address, subnet mask, gateway, and DNS server.
• Create port mapping, default port: 80, 8000, and 554.
Go to Configuration > Network > Basic Settings > DDNS.
Select DDNS Type.
Enter server information.
Click Save.
What to do next
Open the web browser and enter the recorder domain name to visit it.
The device will automatically connect network of high priority.
Go to Configuration > Network > Basic Settings > Priority.
Check Enable NetPriority.
Set the priority of the network.
Platform Connection
The device can be remotely accessed via mobile surveillance platform.
Before You Start
Create the device ID on mobile surveillance platform.
To Next Page
Loading...
Need help?
General