HIKVISION AE-MD5043 - Network Connection; Dial

Mobile Video Recorder User Manual
10
Chapter 4 Network
Network Connection
Set dialing parameters.
Before You Start
Install 3G/4G SIM card and connect 3G/4G antenna to your recorder.
Go to Configuration > Network > Basic Settings > 3G/4G.
Check Enable.
Click Dial Parameters.
Select Network Mode. For now, only automatic mode is supported.
 Automatic:
The recorder will automatically switch to the strongest network.
 Auto-Search and Auto-Switch:
Network priority: 4G > 3G > 2G. The recorder will automatically connect the network of high
priority.
 3G
The recorder only connects 3G network.
 4G
The recorder only connects 4G network.
Optional: To connect private network, enter Access Number, User Name, Password, and
APN.