HIKVISION AE-MD5043 - Image Settings

Mobile Video Recorder User Manual
28
The device supports embedded audio or peripheral audio device has been connected
Go to Configuration > Video/Audio > Audio.
Select Analog Channel Audio Coding and Intercom Audio Coding.
The selected encoding format should be the same with that of the embedded audio or peripheral
audio device.
Click Save.
Image Settings
You can adjust image parameters including brightness, contrast, etc.
Go to Configuration > Image > Display Settings.
Select Channel No.
Set image parameters.
Image Parameters
Options
Descriptions
Scene
Select Standard, Indoor, Outdoor or DimLight according to the
actual situation.
Brightness
It refers to the max. brightness of the image.
Contrast
It refers to the contrast of the image. Set it to adjust the levels
and permeability of the image.
Saturation
It refers to the colorfulness of the image color.
Hue
It refers to the hue of the image.
Sharpness
It refers to the edge contrast of the image.
Denoising
If refers to reduce video noise reduction of the image.
Mirror Type
When the visual angle of the live view image deviates with that
of the actual covered area, you can set the mirror type to
adjust the image to the normal visual angle.