Mobile Video Recorder User Manual
23
Chapter 6 Mobile Device Features
Timed Shutdown
The recorder will automatically start up/shut down according the schedule.
Before You Start
Wire power cord. For details, refer to the Quick Start Guide.
Go to Configuration > Vehicle > Startup.
Select Auto Work Type as Scheduled Startup/shutdown.
Set the shutdown schedule. For detailed steps, refer to Configure Arming Schedule.
Optional: Check Low Power Protect and select Low Power Protect Limit. If the voltage of the
recorder reaches the selected threshold, the recorder will shut down automatically.
Click Save.
Delayed Shutdown
You can set the shutdown delay time (Vehicle Ignition Startup and Shutdown) for the recorder.
Before You Start
Wire power cord. For details, refer to quick start guide.
Go to Configuration > Vehicle > Startup.
Select Auto Work Type as Halt Delay.
Select Delay Time.
Click Save.
Optional: Check Low Power Protect and select Low Power Protect Limit. If the voltage of the
recorder reaches the selected percentage, the recorder will shut down automatically.
Configure Satellite Positioning
The built-in GNSS module supports GPS (Global Positioning System), enabling device positioning and
speed limit alarm.
Before You Start
Install the positioning antenna.
Go to Configuration > Vehicle > Position Settings > Location Configuration.
Select Position Module.
To Next Page
Loading...
Need help?
General