Mobile Video Recorder User Manual
24
Configure Satellite Positioning
Built-in
Obtain data from the satellite positioning module built in the recorder.
Intelligent Display Terminal
Obtain data from display terminal.
Select Locating Module.
Optional: Check Enable of Satellite Timing to synchronize recorder time with satellite time.
Configure speed limit.
1) Select Speed Units.
2) Enter Speed Limit of Alarm.
3) Enter Overspeed Duration (seconds).
If vehicle speed exceeds the set value, the recorder will alarm.
Check the channels you want the positioning information to be displayed.
Enter Blind Replacement and GPS Upload Interval.
Blind Replacement
In the area without network signal, after the signal restores, the positioning information from the
start time without network signal to the current time will be uploaded. For example, if you enter 3,
after the network signal restores, the data from 3 days ago to now will be uploaded.
GPS Upload Interval
To Next Page
Loading...
