Mobile Video Recorder User Manual
15
Go to Configuration > Network > Advanced Settings > Platform Access.
Check Enable.
Select Platform Access Mode as Ehome Platform.
Select Platform Version.
Select Server Address Type, and enter Server Address, Server Port, and Device ID.
Server Address
Enter the static IP address of mobile surveillance platform.
Server Port
The default value is 7660.
Device ID
The ID of the device registered on the mobile surveillance platform. If you leave it empty, device
logs in to the platform with serial No.
Click OK.
• You can download mobile surveillance platform to your computer by visiting our official website
and going to Home > VMS > Support > Download > iVMS-5200 Mobile Surveillance. Official
website: http://www.hikvision.com/en/ .
• You can download iVMS-5260M to your mobile phone by searching it in app store/google play
or scan QR code below. If you use Android system, install Google Play application on your mobile
phone before scanning the QR code.
iOS
Android
The device can be remotely accessed via guarding vision platform.
Before You Start
• Connect your recorder to internet.
• Configure IP address, sub-netmask, gateway, and DNS server of LAN port.
Go to Configuration > Network > Advanced Settings > Platform Access.
Check Enable.
To Next Page
Loading...
Need help?
General