HIKVISION DS-7104HGHI-F1 User Manual

Digital Video Recorder User Manual
156
Figure 8-10 Video Loss Setup Interface
Step 2 Set up handling method of video loss.
Check the checkbox of Enable Video Loss Alarm.
Click button to set up handling method of video loss.
Step 3 Set arming schedule of the channel.
Select Arming Schedule tab to set the channel’s arming schedule.
Choose one day of a week and up to eight time periods can be set within each day. Or you
can click the Copy button to copy the time period settings to other day(s).
Time periods shall not be repeated or overlapped.
Figure 8-11 Set Arming Schedule of Video Loss
Repeat the above steps to set arming schedule of other days of a week. You can also use
Copy button to copy an arming schedule to other days.
Step 4 Select Linkage Action tab to set up alarm response action of video loss (please refer to
Chapter 8.7 Setting Alarm Response Actions).

HIKVISION DS-7104HGHI-F1 Specifications

General

Video Compression	H.264
Video Input	4 channels
Audio Input	1 channel
Audio Output	1 channel
HDD Interface	1 SATA interface
HDD Capacity	Up to 6TB
USB Interface	2 × USB 2.0
Power Supply	12 VDC
Operating Temperature	-10 °C to +55 °C
Operating Humidity	10% to 90%
Video Output	1 VGA, 1 HDMI
Network Interface	1 RJ45 10M/100M Ethernet interface