LED Color/Status Description
PWR
(expansion
module)
Green/Always on The power of expansion module is running nor-
mally.
Orange/Always on The power of expansion module is running
abnormally.
Red/Always on Power failure so the expansion module is
down.
Off The expansion module is powered off.
STA
(expansion
module)
Green/Always on The expansion module is booting.
Green/Blinking The expansion module is running normally.
Red/Always on The expansion module has failed to boot or has
an error.
SG-6000-X7180 LED Indicators Description is shown as below:
LED Color/Status Description
LED Color/Status Description
PWR Green/Always on The device power is running normally.
Orange/Always on The device power is running abnormally.
Red/Always on Power failure so the system is down.
Off The device is powered off.
STA Green/Always on The system is booting.
Green/Blinking The system is running normally.
Red/Always on The system has failed to boot or has an error.
Chapter 1 Product Profile 15
To Next Page
Loading...
Need help?
General