Hillstone SG-6000 X-Series Reference Guide

Hillstone SG-6000-X series supports the following types of XFP optical module. The optical
modules are available with LC-type connectors and are all hot-swappable.
XFP Optical Module Attributes is shown as below:
Attribute
Description
Short-haul
Multimode
Optical Mod-
ule (850nm)
Short-haul
Multimode
Optical Mod-
ule (850nm)
Medium-haul
Single-mode
Optical Mod-
ule (1310nm)
Long-haul
Single-mode
Optical Mod-
ule (1550nm)
Ultra-long
Haul Single-
mode Optical
Module
(1550nm)
Connector LC
Fiber Type 50/125μm
multimode
fiber
62.5/125μm
multi-mode
fiber
9/125μm
single-mode
fiber
9/125μm
single-mode
fiber
9/125μm
single-mode
fiber
Maximum
Transmission
Distance
0.3km
（984.3ft）
(OM3)
0.033km
（108.3ft）
（OM1）
10km 40km 80km
Central
Wavelength
850nm 850nm 1310nm 1550nm 1550nm
Notes: To avoid dust falling into the XFP socket, you should place a rubber dust
cap (originally in the accessory box) over the XFP port.
QSFP+Port
IOM-2Q8SFP+ -200, IOM-2Q8SFP+, IOM-P40-300 and SIOM-P40-300 provide two QSFP+
ports.
QSFP+ Port Attributes is shown as below:
48
Chapter 1 Product Profile

Hillstone SG-6000 X-Series Specifications

General

Brand	Hillstone
Model	SG-6000 X-Series
Category	Control Unit
Language	English