Hioki LR8402-20 - Specifying a Waveform Time Span

4.2 Observing Waveforms
90
Specify a waveform time span when saving a partial waveform or applying numerical cal-
culations (Trace cursors or Vertical cursors).
Specifying a Waveform Time Span
1
Press SCROLL/CURSOR to dis-
play A/B cursors and their val-
ues.
3
Move the A/B cursors using the
left/right cursor keys to specify
the time span.
Select [Move].
2
Apply
Open the setting options
for the item to be set.
Select which cursor(s) to
move.
2
[Move]
A Cur
B Cur
AB Cur
1
3