Hioki LR8402-20 - Remote Measurement with the HTTP Server Function; Displaying the Main Page

10.4 Remote Measurement with the HTTP Server Function
188
The HiLogger includes an HTTP server function for remote data acquisition and on-
screen monitoring using a web browser such as Internet Explorer (IE).
10.4 Remote Measurement with the HTTP Server
Function
• LAN settings and connections must be made before using the HTTP
server function for remote measurements
(p. 178).
• The HTTP server function is not available while measuring using the
Logger Utility program.
Displaying the Main Page
1
Start IE.
2
Enter the HiLogger's address (e.g., http://192.168.1.2) in the [Address] field.
The main page appears.
3
Select [SETTING PAGE].
4
(When the [FTP/HTTP Authentication] HiLogger setting is enabled)
Enter the user name and password, and press the [SET].
To avoid unauthorized access to HTTP functions, we recommend securing connections
w
ith a user name and password on the Communications Settings display of the HiLogger's
[System] screen. FTP/HTTP authentication can be disabled when frequent access to the
HiLogger from multiple PCs is necessary.
See: "Enable [FTP/HTTP Authentication]."(p. 212)
2
3
• Microsoft InternetExplorer Version 5 or later is recommended as the
browser. Set the security level to "Medium" or "Medium-high", and invali
-
date the pop-up block.
• Remote operation by HTTP is not available while measuring with the
Logger Utility or a Visual Basic program.