2.2 Using the Battery Pack (Option)
31
3
2
Chapter 2 Measurement Preparations
Regardless of whether the Memory HiLogger is on or off, the battery pack recharges
whenever the 9418-15 AC Adapter is plugged in to a power source (p. 32).
Therefore, charging is provided by merely keeping the battery installed in the Memory
HiLogger.
Charge the Battery Pack
Charging is finished when the
CHARGE LED turns off.
The CHARGE LED
lights orange when
charging begins.
When to charge
When powering the HiLogger from the battery pack without the Model 9418-15
AC Adapter, the low battery indicator ( ) is displayed when the battery
charge is depleted, indicating that the battery pack requires charging.
Approximate charging time:
Quick charging a "Low" battery pack takes about three hours.
The Charge LED turns off an hour of additional charging.
To Next Page
Loading...
