Hioki LR8402-20 - Loading Data on the Hilogger; Loading a Setting Configuration

6.3 Loading Data on the HiLogger
132
Previously stored binary waveform data, captured screen images and saved setting
configurations can be reloaded into the HiLogger (p. 121).
Setting configurations saved in the HiLogger's memory or on a removable storage can
be reloaded.
6.3 Loading Data on the HiLogger
Loading a Setting Configuration
Select the [Setting]
Screen.
Select [Load Set.].
1
2
Apply
Select the configuration
file to load.
(CONFnnnn.SET)
HiLogger settings are reconfigured to
those in the loaded configuration file.
Apply
The loading dialog appears.
3
Select whether to load
from HiLogger memory,
CF card, or USB flash
drive.
Apply
(If you selected [CF Card], or [USB
memory])
When Loading from removable storage
Configuration files stored in the [HIOKI_LR8400]-
[CONFIG] folder on the removable storage are
displayed.
See: To Save a Setting Configuration: (p. 131)
When Loading from HiLogger Memory
The list of configurations stored in HiLogger mem-
ory is displayed.
4
(If you selected [Memory])
Select [Load] for the con-
figuration you want to
load.
Apply
Setting configurations saved to removable
storage can be reloaded from the File screen
(as described on the next page).