Hioki LR8402-20 - Setting the Display Time Base (Horizontal Axis Magnification)

3.5 Waveform Display Settings (as needed)
68
Displayed waveforms can be expanded or compressed along
the horizontal axis. Shorter setting values correspond to greater
magnification. Make these settings on the [Setting] screen.
See:"Time Setting by Key Operations" (p .50)
Settings can be changed during and after measurement on the
[Wave+Value] display of the Waveform/Numerical screen(p. 89).
The [Time/DIV] range depends on the [Interval] setting.
Horizontal axis display options are affected when the recording interval is changed after measuring, be-
cause the options for expanding (or compressing) the displa
yed axis depend on the recording interval used
when measuring. When using the Logger Utility program with a LAN connection, recording intervals from 100
ms to 2 s are not available, regardless of auto save settings (5 s is automatically selected).
Setting the Display Time Base (horizontal axis magnification)
1 div
Select the time per division.
Setting options:(  : default setting)
100ms
, 200ms, 500ms, 1s, 2s, 5s, 10s, 20s, 30s, 1min,
2min, 5min, 10min, 20min, 30min, 1h, 2h, 5h, 10h, 12h,
1day [/DIV]
: Selectable, ×: Not selectable, : Not selectable while measuring
Horizon-
tal axis
Recording interval
[ms] [s] [min] [h]
10 20 50 100 200 500 1 2 5 10 20 30 1 2 5 10 20 30 1
100ms
  
× × × × × × × × × × × × × × × ×
200ms
   
× × × × × × × × × × × × × × ×
500ms
   
× × × × × × × × × × × × × × ×
1s
     
× × × × × × × × × × × × ×
2s
      
× × × × × × × × × × × ×
5s
      
× × × × × × × × × × × ×
10s
        
× × × × × × × × × ×
20s
         
× × × × × × × × ×
30s
         
× × × × × × × × ×
1min
           
× × × × × × ×
2min
            
× × × × × ×
5min
            
× × × × × ×
10min
              
× × × ×
20min
               
× × ×
30min
               
× × ×
1h
                 
×
2h 
                 
5h  
                
10h   
               
12h   
               
1day    
              
When auto save is enabled for waveforms
100, 200 and 500 ms settings are automatically changed to 1 s when measurement starts, and
the shorter values cannot be selected while measuring.