8.5 Making System Settings
159
3
Chapter 8 System Environment Settings
8
This procedure resets all settings to their factory defaults.
The system is reset by pressing and holding STOP while turning the HiLogger POWER
switch on.
See: About the factory default settings:"Appendix 6 List of Default Settings" (p. A11)
Initializing the HiLogger (System Reset)
Select the [System]
Screen.
Select [Initialize].
Apply
A confirmation dialog appears.
1
2
3
Select [Yes].
Apply
Initialization proceeds.
Setting configuration, language selection, and communication-related settings saved in
the HiLogger are not reset.
Initializing All Settings (All Reset)
To reset the setting configuration, language selection, and communication-related set-
tings saved in the HiLogger, hold START and STOP while turning the HiLogger on.
When the power is switched on, the language selection screen will display for you to
choose the language you wish to use.
All Reset sets the communications interface to USB.
To Next Page
Loading...
