Hioki LR8402-20 - Setting How to Handle Date Data Stored in CSV Files; External Trigger Input Settings; Selecting the External Trigger Function; Set Alarm Event Marking

8.4 External Trigger Input Settings
157
3
Chapter 8 System Environment Settings
8
This section describes how to configure the handling of date data stored in CSV files.
Date set
format
See: "Key Setting Procedure" (p .152)
Select the function of the EXT.TRIG input terminal.
External Trig
In
(
External Trig-
ger Input)
Selects whether an event mark is inserted when an alarm event occurs.
Event mark for
alarm
(
Alarm Event
Marking)
Setting How to Handle Date Data Stored in CSV Files
Setting options:(  : default setting)
Comment
 Date data is output using the following format: ' (apostrophe)
YEAR (2 digits) - MONTH (2 digits) - DAY (2 digits) HOURS (2
digits) : MINUTES (2 digits) : SECONDS (2 digits) . MILLISEC-
ONDS (2 digits). This information is treated as a comment in Ex-
cel.
Split msec. Date data is output using the format, with sub-second time data
(unit: ms) is output separately: " (double quotation) YEAR (4
digits) - MONTH (2 digits) - DAY (2 digits) HOURS (2 digits) :
MINUTES (2 digits) : SECONDS (2 digits) " (double quotation).
In Excel, sub-second time data is displayed in a separate col-
umn. This format is conve
nient when you wish to combine CSV
data acquired from different instruments in Excel.
8.4 External Trigger Input Settings
Selecting the External Trigger Function
Setting options:(  : default setting)
Trigger

Triggering occurs when a signal is applied
to the EXT.TRIG terminal.
Event An event mark is inserted into measure-
ment data when a signal is applied to the
EX
T.TRIG terminal.
Set Alarm Event Marking
Setting options:(  : default setting)
Off

Event marks are not inserted by alarm
events.
On Event marks are inserted by alarm events.