Hioki LR8402-20 - Hilogger Auto-Send Settings

10.6 Auto Sending Data using the FTP Client Function
211
3
Chapter 10 Connection to a PC (Communication)
10
This example illustrates sending data to an FTP server with address 192.168.1.1.
Key Setting Procedure
HiLogger Auto-Send Settings
HiLogger FTP Server PC
(e.g., 192.168.1.2)
(e.g., 192.168.1.1)
Select the [System] Screen.
Move to a setting item.
Apply
Open the setting options
for the item to be set.
Select from the listed op-
tions.
1
3
Select [FTP].
[FTP] cannot be selected when
the [Communication Inter-
face] is set to [USB]. Set the
communications interface to
[LAN] before selecting [FTP].
2