Hioki LR8402-20 - Page 224

10.6 Auto Sending Data using the FTP Client Function
212
Increment/decrement by 1
Increment/decrement by 10
Numerical Settings
Character Settings
See: 
"3.7 Entering Titles and Comments (as
needed)" (p. 71)
1 Enable [FTP Auto Transfer] (set to
On).
2 Set each item (p. 213).
3 Set the [Time Difference].
If the PC clock and the HiLogger FTP
server clock have different times, specify
the time difference.
4 Enable [FTP/HTTP Authentica-
tion].
To restrict access to the FTP server, en-
able FTP/HTTP authenticatio
n and set a
user name and password.
5 (When [FTP/HTTP Authentication]
is enabled)
[User Name] setting
Enter the user name that will be required
to access the HiLogger from an FTP cli-
ent or HTTP user agent.
[Password] setting
Enter the password that will be required
to access the HiLogger from an FTP cli-
ent or HTTP user agent.
The password is displayed as
“************”.
Setting options:
-12h to 12h (Default setting: 0h)
Setting options: (  : default setting)
Off
 FTP/HTTP server access is un-
restricted.
On FTP/HTTP server access is re-
stricted.
Setting options:
Up to 12 characters
Setting options:
Up to 12 characters
1
2
4
5
3