Hioki LR8402-20 - PC Network Setup

10.2 LAN Settings and Connections (Before connecting to the network)
180
The setup procedure is the same when connecting one HiLogger to the PC as it is when
connecting multiple HiLoggers to the PC through a hub.
These instructions presume a network configured as follows.
: Although the IP address can be freely set, a private IP address is normally more secure.
1. PC Network Setup
IP Address
192.168.1.0/24 (network address)
(or, enter 192.168.1.1 as a private IP address

)
Subnet Mask 255.255.255.0
To display the following dialogs
1. Click the Windows [Start] button and select [Control Panels]-[Network and
Internet Connections]-[Network Connections]-[Local Area Connection].
2. Right click [Local Area Connection], and select Properties.
1 Double click
2 Click
3 Enter