Hioki LR8402-20 - Key Setting Procedure; Real-Time Calculation While Measuring (Auto Calculation)

7.1 Calculate Average, Maximum, Minimum, and Etc.
144
Calculations are automatically performed in real time while measuring.
Key Setting Procedure
Select the [Setting]
Screen.
Move to a setting item.
Apply
Open the setting options
for the item to be set.
Select from the listed op-
tions.
1
2
Real-Time Calculation While Measuring (Auto Calculation)
1 Select [On].
2 Select numerical calculation types.
To record calculated values at specified intervals (split calculations), perform
steps 3 and 4.
(To record calculated values only from measurement start to the present, skip
to
step 5.)
Setting options: (
 : default setting)
Average, P-P, Maximum, Minimum, T
ime to Max, Time to Min, Off
1
2
(continues on next page)