10.4 Remote Measurement with the HTTP Server Function
190
Click [START/STOP] to display this screen.
Click the buttons to operate.
Click [CURRENT DA
TA DISP] to display current measurements.
• While measuring, you can monitor numerical data acquired from each channel at
e
very recording interval. Screen refresh time can be selected from Off, or 5, 10, or 60
seconds.
• When measurement is stopped, instantaneous input data from each channel is dis-
played.
• You can select which input unit to display.
Start/Stop Measurement
Click
Shows current mea-
surement status
Starts Measurement
Stops Measurement
Shows current
memory status
Viewing Current Measurement Values
Click
Select the input unit to display,
and press the SET button.
To Next Page
Loading...
