6.5 Transferring Data to a PC (USB Drive Mode)
140
Data saved to a CF card can be transferred to a PC using the supplied USB cable.
Before connecting the USB cable to the HiLogger, set the communications inter-
face setting to USB (p. 170), and select “USB Drive Mo
de” on the HiLogger.
6.5 Transferring Data to a PC (USB Drive Mode)
• Refer to the Logger Utility Instruction Manual (on the supplied CD) to
observe data using the Logger Utility program on a PC
(p. 187).
• Data cannot be read from a USB flash drive in the HiLogger. To load files
f
rom a USB flash drive removed from the HiLogger, insert it into a USB
slot on the PC.
• USB Drive Mode is not available with Windows 2000.
Select the USB Drive Mode
Select the [System] Screen.
Select [USB Drive Mode].
Apply
A confirmation dialog appears.
1
2
3
Select [Yes].
Apply
The USB Drive Mode is enabled.
4
Connect the USB cable (p. 141).
No other HiLogger operations are available
when the USB Drive Mode is
enabled. Also, HiLogger communications
with the supplied Logger Utility program
are disabled.
See: "To exit USB Drive Mode" (p .141)
To Next Page
Loading...
