When a tab is se-
lected with the cur-
sor, press the left/
right cursor keys
to select between
the Settings
screens.
[CH] Screen
[Conv/Calc] Screen
[Comment] Screen
Enter channel comments (p. 71).
[Setting] Screen
[Range] Screen
[Trig & Alm] Screen
[System] Screen
Configure the system environ-
ment (p. 151).
Settings Screens
Operational infor-
mation is displayed
along the bottom of
the screen.
Selects a measurement in-
put unit and its settings.
The screen switch-
es each time you
press the key.
(7 display types)
Make these settings to convert
measured values to arbitrary units
for display (p. 74).
Recording criteria (triggering) and
warning sounds can be set for
each channel (p. 99).
Make settings while viewing all
channel settings (p. 74).
Make settings for recording (p. 50).
Set numerical calculation, auto-
saving and timers.
Make input channel settings while
viewing the monitor display (p. 53).
Press the left/right
keys to select be-
tween the Settings
screens.
To Next Page
Loading...
