Traffic control
142
8.4
Prioritization
Basic - L3P
Release
3.1
06/07
8.4.4 Handling of received priority information
The Switch provides three options for selecting how it handles received data
packets that contain priority information.
D trust dot1p
The Switch assigns VLAN-tagged packets to the different priority classes
according to their VLAN priorities. The assignment is based on the pre-
defined table (see
“Tagging” on page 136). You can modify this assign-
ment.
D no trust
The Switch does not trust the priority information in the packet and always
assigns the packets the port priority of the receiving port.
D trust ip-dscp (MACH 4002-24G/48G)
The Switch assigns the IP packets to the different priority classes accord-
ing to the DSCP value in the IP header, even if the packet was also VLAN-
tagged. The assignment is based on the pre-defined
table 11 on
page 141. You can modify this assignment.
8.4.5 Handling of priority classes
For the handling of priority classes, the Switch provides:
49-55 6
56 CS7 7
57-63 7
DSCP Value DSCP Name Priority Class
(default setting)
Table 11: Mapping the DSCP values onto the priority classes
To Next Page
Loading...
Need help?
General
