Hirschmann Power MICE - EnablingDisabling TelnetWebSsh Access

Protection from unauthorized access
Basic - L3P
Release 3.1 06/07
6.2 Setting Telnet/Web/SSH access
81
6.2.4 Enabling/disabling Telnet/Web/SSH access
V Select the Security:Telnet/Web/SSH Access dialog.
V Switch off the server to which you wish to disable access.
V Enter the command enable to switch to the privileged EXEC mode.
V Enter the command transport input telnet to switch on the
telnet server.
V Enter the command no transport input telnet to switch off
the telnet server.
V Enter the command ip http server to switch on the Web server.
V Enter the command no ip http server to switch off the Web
server.