Hirschmann Power MICE - Disabling HiDiscovery function

Protection from unauthorized access
82
6.3 Disabling HiDiscovery function
Basic - L3P
Release 3.1 06/07
6.3 Disabling HiDiscovery
function
6.3.1 Description HiDiscovery protocol
The HiDiscovery protocol (see “Entering the IP parameters via HiDiscovery”
on page 35) allows you to assign an IP address to the Switch on the basis of
its MAC address. HiDiscovery is a layer 2 protocol.
Note: For security reasons, either limit or switch off completely the HiDisco-
very function of the Switch after assigning the IP parameters.