Hirschmann Power MICE - Disabling Hidiscovery Function

Protection from unauthorized access
Basic - L3P
Release 3.1 06/07
6.3 Disabling HiDiscovery function
83
6.3.2 Disabling HiDiscovery function
V Select the Basics:Network. dialog.
V Switch off the HiDiscovery function in the “HiDiscovery Protocol”
frame, or limit access to “read-only”.
V Enter the command enable to switch to the privileged EXEC mode.
V Enter the command network protocol hidiscovery off to
switch off the HiDiscovery function.
V Enter the command network protocol hidiscovery read-
only to switch on.the HiDiscovery function with the read-only access
right.
V Enter the commandnetwork protocol hidiscovery read-
write to switch on the HiDiscovery function with the read-write
access right.