Protection from unauthorized access
Basic - L3P
Release
3.1
06/07
6.2
Setting Telnet/Web/SSH access
79
6.2 Setting Telnet/Web/SSH
access
6.2.1 Description Telnet/Web access
The Telnet server of the Switch allows you to configure the Switch using the
Command Line Interface (in-band). You can switch off the Telnet server to
prevent Telnet access to the Switch.
In the state of delivery, the server is switched on.
After the Telnet server has been switched off, a new access to the Switch
with a Telnet connection is not possible. An existing Telnet connection
remains.
Note: The command line interface (out-of-band) and the Security:Tel
net/Web Access dialog in the Web-based Interface allow you to to activate
the telnet server again.
6.2.2 Description Web access
The Web server of the Switch allows you to configure the Switch using the
Web-based interface. You can switch off the Web server to prevent Web
access to the Switch.
In the state of delivery, the server is switched on.
After the Web server has been switched off, a new logon with a Web browser
is not possible. The logon in the opened browser window keeps active.
Note: The command line interface allows you to activate the Web server
again.
To Next Page
Loading...
Need help?
General
