Traffic control
Basic - L3P
Release
3.1
06/07
8.6
VLANs
155
Note: In a HIPER-Ring with VLANs you should only operate devices
with the software that supports this function, namely:
D RS2 xx/xx (from Vers. 7.00),
D RS2-16M,
D RS 20, RS 30, RS 40
D MICE (from Rel. 3.0) or
D Power MICE
D MS 20, MS 30
D MACH 1000
D MACH 3000 (from Rel. 3.3)
D MACH 4000
D OCTOPUS
Note: In the HIPER-Ring configuration, select for the ring ports
– VLAN ID 1 and “Ingress Filtering” disabled in the port table and
– VLAN affiliation U in the static table.
Note: In the Ring/Network Coupling configuration, select for the cou-
pling and partner coupling ports
– VLAN ID 1 and “Ingress Filtering” disabled in the port table and
– VLAN affiliation U in the static table.