Loading Software Updates
Basic - L3P
Release
3.1
06/07
4.2
Loading the Software from the tftp Server
67
V After the loading procedure has been completed successfully, activa-
te the new software as follows:
Select the Basics:Restart dialog und and perform a cold start.
V After booting the switch, click “Reload” in your browser to re-enable
your access to the Switch.
enable
copy tftp://10.0.1.159/
rsL2E.bin system:image
Switch to the Privileged EXEC mode.
Transfer the software file „rsL2E.bin” from the tftp
server with the IP address 10.0.1.159 to the
Switch.
To Next Page
Loading...
