Hitachi DKC910I - Installing Power Supply (DBPS) for SBX;UBX;FBX;NBX

Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(IN)08-04-20]
Rev.1
INST(IN)08-04-20
8.4.2 Installing Power Supply (DBPS) for SBX/UBX/FBX/NBX
1. With the lever completely opened, insert the Power Supply (DBPS) into the slot.
If you cannot insert the Power Supply (DBPS) into the slot easily, insert it after adjusting the position by
slightly returning the lever.
2. Push the Power Supply (DBPS) in all the way.
3. Close the lever completely to x the Power Supply (DBPS) .
Figure 8-14 Installing Power Supply (DBPS)
Lever
DBPS2
DBPS1