Hitachi DKC910I - Connecting Iscsi Cables

Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(IN)09-01-90]
Rev.0.5
INST(IN)09-01-90
9.1.2 Connecting iSCSI Cables
1. Connect the iSCSI cables after making sure of the ports to be connected on the rear face of the Storage
System.
NOTE : When bending the iSCSI cable to connect it, give it a bend with a long radius (not less
than 40 mm) so as not to apply the cable and the connector excessive stresses.
Figure 9-7 Connection Port for iSCSI Cables (1/2)
*1 : The gure shows DKC with 10 G bps iSCSI installed.
CHB Port Number
Rear view of DKC-0
1B/3B 1D/3D
1F/3F
1A/3A
1E/3E
1H/3H
1C/3C
1G/3G
Rear view of DKC-1
2B/4B 2D/4D
2F/4F
2A/4A
2E/4E
2H/4H
2C/4C
2G/4G
Rear view of DKC-2
1K/3K 1M/3M
1P/3P
1J/3J
1N/3N
1R/3R
1L/3L
1Q/3Q