Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(IN)12-01-10]
Rev.2
INST(IN)12-01-10
12. Attaching Logo
NOTE: This procedure should be applied at the time of shipment in the factory.
1. Attach the logo to the Front bezel of the DKC-1.
2. After attaching the logo, peel off the clear protection lm of the logo.
Figure 12-1 Attaching Logo Label
Table 12-1 Logo Labels
No. Model Name Parts No.
1 VSP 5000 Series 3292735-5
Logo label
Front Bezel (4U) for DKC-1
Locating lines
To Next Page
Loading...
