Hitachi DKC910I - Procedure of New Installation of the Micro-Program; TOD Setting and Set IP Address

Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(IN)14-02-10]
14.2 Procedure of New Installation of the Micro-program
14.2.1 TOD Setting and Set IP Address
[1] TOD Setting (Turn on storage system power before TOD Setting)
1. <Open the Control Panel window>
Click [Start], and then select [Control Panel] from [Windows System].
Rev.0.1
INST(IN)14-02-10