Hitachi DKC910I - Procedures

Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(IN)14-01-30]
Rev.0.1
INST(IN)14-01-30
14.1.3 Procedures
1. Summary
The procedures are divided roughly into 3 processes.
(1) Pre-processing (the installation of the micro-programs into the SVP HD : (1)-(8) in the following
flow)
(2) Execution of “New Installation” by the SVP.(By this procedure, the customerʼs congurations are
dened, and the micro-programs are installed.) : ((9)-(11) in the following flow)
(3) Others ((12)-(29) in the following flow)
2. Processing Flow
The processing flow of the new installation is as follow: