Hitachi DKC910I - Conditions to Use These Procedures

Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(IN)14-01-20]
Rev.0.1
INST(IN)14-01-20
14.1.2 Conditions to use these procedures
These procedures can be used in the following conditions:
1. The installation of the Hardware parts (for example, the connections of cables, power supplies and so on)
have been nished. (For the Hardware installation, refer to “Procedures for Installing Storage System”
(INST(IN)01-01-10))
2. The PC (SVP) is installed and can be used. (For the SVP installation, refer to (REP(RSVP)05-12))