Hitachi DKC910I - New Installation SVP Procedure; New Installation Procedures Without the Pre-Installation at a Customer Site; Application

Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(IN)14-01-10]
Rev.0
INST(IN)14-01-10
14. New Installation SVP Procedure
14.1 New Installation procedures without the pre-installation at a customer site
14.1.1 Application
These procedures are applied to a new installation without the pre-installation at a customer site or the pre-
installation at the warehouse as shown below.
• Installing the micro programs into the storage system. Its version must be appropriate one.
• Installing the conguration information which is appropriate to the customer.
If these procedures are used in other cases, their processes are not assured.