Hitachi DKC910I - Removing Power Supply (DBPS) for SBX;UBX;FBX;NBX

Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(IN)05-04-20]
Rev.1
INST(IN)05-04-20
5.4.2 Removing Power Supply (DBPS) for SBX/UBX/FBX/NBX
1. Pull the lever open (

) while pressing the latch on the Power Supply (DBPS) inward with right thumb (

).
When the lever is completely opened, the Power Supply (DBPS) comes out forward.
2. Pull out and remove it while holding the body of the Power Supply (DBPS) with both hands.
Figure 5-10 Removing Power Supply (DBPS)
Latch
Lever
DBPS1
DBPS2
Lever
Latch
Latch and lever operation of DBPS