Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(IN)09-03-53]
• For VSP 5500 and VSP 5500H in which SSVP1 is installed
(1) Connect the LAN cables to the upper LAN ports on SSVP0 via the LAN cable kit.
(a) Connect the LAN cables between the LAN port (U1) on SSVP0 and the LAN board 1
(Management LAN port) on DKC-0.
(b) Connect the LAN cables between the LAN port (U3) on SSVP0 and the LAN board 1
(Management LAN port) on DKC-1.
(2) Connect the LAN cables to the upper LAN ports on SSVP1 via the LAN cable kit.
(a) Connect the LAN cables between the LAN port (U1) on SSVP1 and the LAN board 2
(Management LAN port) on DKC0.
(b) Connect the LAN cables between the LAN port (U3) on SSVP1 and the LAN board 2
(Management LAN port) on DKC-1.
(c) Connect the LAN cables between the LAN port (U0) on SSVP0 and the LAN port (U0) on
SSVP1.
(d) Connect the LAN cables between the LAN port (U2) on SSVP0 and the LAN port (U2) on
SSVP1.
Rev.2
INST(IN)09-03-53
To Next Page
Loading...
