Hitachi DKC910I - Page 192

Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(IN)14-02-70]
(3) <Backup for conguration information>
(a) The message [CNF3686i] is displayed. Select “SSVP”, and then click [OK].
NOTE: When you change the IP address of Standby SVP, backup of the conguration
information is unnecessary. Click [Cancel]. The message [INS1105i] “This will reboot
SVP” in Step (4) is displayed.
(b) When backup of conguration information is completed, the message [CNF3188i] is displayed.
Click [OK].
Rev.7
INST(IN)14-02-70