Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(IN)08-01-30]
Figure 8-2 Drive Mounting Location (UBX)
*1: The name in parentheses in the SVP messages shows HDDxxx-yy here.
*2: DKU-xy(n)
n: Drive Box number in DKU (0, 1, 2 ..., 7)
y: DKU No. (1, 2 ..., 7)
x: CBX Pair No. (0, 1, 2)
*3: DB-zzz
DB No. (008, 009, 010, ........, 191)
*4: The slot number on DBL (UBX) displayed in the DKU-mm: Drive Box window of Maintenance
Utility is the same as “yy” in “HDDxxx-yy”.
NOTE: Turn on the LOCATE LED by using Maintenance Utility during maintenance work.
If you cannot turn on the LOCATE LED, check the number (*2) shown on the label
attached to the lower left part of the front side of UBX so that you do not confuse the
maintenance target.
For correspondence of DKU# (DKU-xy(n)) to DB# (DB-zzz) and HDD location#, see
“Correspondence of DKU# to DB# and HDD Location#” (LOC02-84).
HDD zzz-08
HDD zzz-04
HDD zzz-00
HDD zzz-09
HDD zzz-05
HDD zzz-01
HDD zzz-10
HDD zzz-06
HDD zzz-02
HDD zzz-11
HDD zzz-07
HDD zzz-03
DB-zzz
DKU-xy(n)
(A label is attached.)
Rev.7
INST(IN)08-01-30
To Next Page
Loading...
