2-3
Features of the service personnel maintenance mode
No. Functions Contents
1 Maintenance menu The second page of the maintenance menu can be
displayed.
2 User environment
setup screen
The excitation V-ref. warning can be displayed.
3 Operation
management
screen
The cumulative operating time can be changed.
4 Operation
management
screen
The heating unit temperature and the ink temperature can
be displayed.
5 Excitation V update
screen
The indicator value of excitation voltage output and the
ambient temperature can be displayed.
6 Select language
screen
The language saving and input mode are possible.
7 View alarm history
screen
The alarm log can be cleared by the clear key.
8 Circulation control
menu
The viscometer calibration screen can be selected.
9 Parts usage time
management
The time of the pump and the solenoid valves can be
changed.
10 Unit information
screen
The serial number and the ink coefficient can be changed.
11 Fault The fault, No ink drop charge, does not invoke ink
stoppage.
A memory card with the IJP system data (hereinafter referred to as “system data memory
card”) is necessary to carry out the following service personnel maintenance works.
No. Functions Contents
1 System
environment setup
The memory card is necessary to change the nozzle
diameter. The card is not required for other setting.
2 Download Data for upgrading are stored.
(The memory card is required.)
3 Select language New language data to save are stored.
The memory card is not required for other setting.
4
Software option
setup
The memory card is necessary to setup the Software
Option. EZJ99 Board is also necessary.
Caution:
- Be sure to use the system data memory card stored the latest version software.
- Use a flash ATA card TYPE2 (32 MB or more) for the memory card.
To Next Page
Loading...
Need help?
General
