Hitachi PXR

6-4
Appendix: nozzle drive conditions
This table shows the nozzle drive conditions for each ink of the PXR type IJP together.
When performing the reset or the like of the kinds of ink, be careful because the
excitation frequency and the standard pressure vary depending on the ink.

(1) 65 µm nozzle
Standard pressure
Ink
(MPa)
Excitation
frequency
(kHz)
Temperature
range
(ºC)
Remarks
K26 0.255 68.9 0 - 35
K27 0.255 68.9 0 - 45
R27 0.255 68.9 0 - 35
B27 0.255 68.9 0 - 35
G27 0.245 68.9 0 - 35
K28 0.245 68.9 0 - 35
K31A 0.245 68.9 0 - 35
K33 0.255 74.0 0 - 35
Y37 0.255 68.9 0 - 35
K60 0.245 68.9 0 - 35
K61 0.245 68.9 0 - 35
K62 0.255 68.9 0 - 35
F63 0.255 68.9 0 - 35
T64 0.255 68.9 0 - 35
K65 0.255 68.9 0 - 35
K67 0.255 68.9 0 - 45
K68 0.245 68.9 0 - 35
R65 0.255 68.9 0 - 35
K69 0.255 68.9 0 - 45
K70 0.255 68.9 0 - 35
T71 0.255 68.9 0 - 35
K72 0.245 68.9 0 - 40
T75 0.255 68.9 0 - 35
R76 0.255 68.9 0 - 35
W73 0.300 62.5 0 - 40 PXR-P