Hitachi PXR User Manual

7-24

7.3.3 Improper Sensor Position

Is there an excessive
clearance between the
print head and print target
detector?
Y
es
Improper Sensor Position
Is the repeat printing
function required?
No
Set the “Repeat count”
to “0000”.
Replace the EZJ93 board.
Y
es
No
Resume the
operation.
Decrease the
clearance between
the print head and
print target
detector.
Y
es
Ensure that the print
start signal does not
chatter any longer.
Y
es
No
Is the print start signal
chattering?
No
Is the “Repeat count”
is set to “0000” from
the print
specifications screen?

Hitachi PXR Specifications

General

Brand	Hitachi
Model	PXR
Category	Printer
Language	English