4 Electrical wiring
125
SMGB0087 rev.0 - 12/2013
4
MARK NAME
MC Motor (for compressor use)
M0F1,2 Motor (for fan use
EF1,2 Power fuse
RVR 4 way solenoid valve
SVA,C Solenoid valve
MV Electronic expansion valve
CMC Mag. Contactor (for compressor use)
TB1 Terminal stand
TR1 Transformer
PCB1 Printed Board
EFR1 Fuse
EF1,3 Fuse
EF1 Fuse
Y52C
Aux. Relay (for compressor and magnetic
ontactor use)
Y20A Aux. Relay (for solenoid valve use)
Y20C Aux. Relay (for solenoid valve use)
Y21SW Aux. Relay (for 4 way solenoid valve use)
YCH Aux. Relay (for oil heater use)
DM1 Diode module
THM7 Thermisor (for outdoor temperature use)
THM8 Thermistor (for piping use)
MARK NAME
THM9 Thermistor (for TD use)
Pd Pressure sensor (discharge side)
PSH High pressure switch (for protection)
PSL Low pressure switch (for control)
DCL Reactor
DIP-IPM Inverter module
NF1-8 Noise lter
PSW1 Switch (for forced defrosting use)
PSW2
Switch (for checking use ())
PSW3
Switch (for checking use ())
DSW1 Switch (for test run use)
DSW2 Switch (for aux. function setting use)
DSW3 Switch (for outdoor capacity setting use)
DSW4 Switch (for refrigerant system setting use)
DSW5 Switch
DSW6 Switch
RSW1 Switch (for refrigerant system setting use)
CH Oil heater
DS1,2 Plug-in connector
E1,2 Earth
CE1,2 Terminating connector
To Next Page
Loading...
