Hitachi RAS-(4-12)HNP(1)(E) - Page 62

2 Unit Installation
48
SMGB0087 rev.0 - 12/2013
Specicationsofsnowprotectionhood
Productname Airdischargehood Rearsuctionhood Leftsuctionhood
Model
ASG-NP335F1
ASG-SP11FB
ASG-NP335FS3
ASG-SP11FBS
ASG-SP10BE ASG-SP10BES ASG-5P10LE ASG-SP10LES
Quantity 1 unit
Material
Bonderized
steel sheet
Iron
Stainless
(NSSC 180)
Bonderized
steel sheet
Iron
Stainless
(NSSC 180)
Bonderized
steel sheet
Iron
Stainless
(NSSC 180)
Color
Gray
(1.0Y8.5/0.5 or
approximation)
—
Gray
(1.0Y8.5/0.5 or
approximation)
—
Gray
(1.0Y8.5/0.5 or
approximation)
—
Weight 3 kg 10 kg 6 kg
Assembling Knockingdown parts (assembled at eld)
Components
Hood For air discharge part x 1
For rear side air intake x 1
(Upper side x 1 lowe side x 1)
For left side air intake x 1
Unit Fixing
screw
6 (M5x12 tapping screw) 9 (M5x12 tapping screw) 10 (M5x12 tapping screw)
Unit Fixing
screw (SUS)
6 (M5x12
tapping screw)
8 (M5x14)
14 (M5x12
tapping screw)
16 (M5x14)
12 (M5x12
tapping screw)
14 (M5x14)
Installation manual
Installation restriction
Installation with “Guard net” or
“Wind guard” is not available
Installation with “Guard net” is not available
Safety wire rope for over-
turning prevention
(optional parts)
ASG-SW20A